Products
Embedded Device Servers
Device Servers
Single-Port
UDS100
UDS-10
MSS100
MSS485-T
Multiport
MSS4
MSS-VIA 
Industrial
CoBox-FL
CoBox-FL-IAP
UDS-10-IAP
DSTni-XPress DR & DR-IAP
Embedded Software
Terminal Servers
Console Servers
Console Management Software
Server Management
Visualization
Print Servers
Network Time Servers

 

Highlights
Specifications
Ordering

In today's Internet economy, faster and better access to information can mean the difference between success and failure. But what about the thousands of devices out there that lack network connectivity and can't communicate over Ethernet networks? Expensive PCs can get the job done in some cases, but why pay for a bulky PC when all you need is cost-effective network connectivity?

The Lantronix UDS-10 Device Server provides a quick, simple and cost-effective way to bring the advantages of data accessibility and remote management to thousands of devices that cannot connect to the network.

Replace expensive dedicated PCs or lengthy serial cables with fast and reliable networking technology.
Compact size, smaller than a deck of playing cards
Supports RS232, RS422 and RS485 serial connections via its DB-25 serial port
10 Mb/s Ethernet through the RJ-45 connector
Configure via HTTP, SNMP, DHCP or Telnet
Flash ROM for easy software upgrades

Supported Protocols ARP, UDP, TCP, Telnet, ICMP, SNMP, DHCP, TFTP, and HTTP
Device Support Supports any asynchronous serial device with 7 or 8-bit data, with or without parity, requiring Ethernet access
Network Interface RJ45 (10BASE-T) Ethernet
Serial Interface Female DB25 RS-232/RS-422/RS485 serial port with DCE configuration
Data Rates Serial speeds 300 bps up to 115 Kbps
Flow Control Software XON/XOFF
Hardware CTS/RTS
Modem Controls RTS, CTS, DSR, DCD, DTR
Management Internal HTTP server
SNMP (read only)
Serial login
Telnet login
System Firmware Flash ROM standard; downloadable from a TCP/IP host (TFTP)or over the serial port
LEDs Good Link (green)
Network transmit/Receive data (yellow)
Collisions (red)
Diagnostic (red)
Status (green)
Physical Dimensions
(H x W x D)
0.9 x 2.5 x 3.5 in
(2.3 x 6.4 x 9.0 cm)
Weight: 0.8 lbs (.35kg)
Shipping Dimensions
(H x W x D)
4.5 x 9.5 x 7.5 in
(11.5 x 24.2 x 19.1 cm)
Weight: 3.0 lbs (1.5kg)
Power Requirements External adapter included as 110 VAC (-01 models) or 230 VAC (-02 models)

Required input power of 9-30VDC @ 250mA max.
Environmental Operating Temperature
5 to 50°C (41 to 122°F)

Storage Temperature
-40 to 66°C (-40 to 151°F)
Agency Approvals CE, FCC A, TUV, C/UL
Warranty 1-year limited warranty - as of August 1st, 2003

Part Number Description
UDS-10-01 Device server, 1 DB25 (RS-232/RS-485/RS-422) DCE serial port, RJ45 (10BASE-T) network ports, diagnostic LEDs, installation guide, external 110VAC power supply
UDS-10-02 Same as above with 230VAC power supply
UDS-M-SBC
(optional)
Male DB25 to RS-485 screw block connector
I
Datasheet (PDF)
French Datasheet (PDF)
Spanish Datasheet (PDF)
User Guide (PDF)
Latest Firmware
DeviceInstaller
Networking Tutorials
Glossary
 
 

 

 

Back to Home Page

                                      

                         

 

©National Data Mux 2002. - All products and brand names mentioned are trademarks or registered trademarks of their respective owners