Products
Embedded Device Servers
Device Servers
Embedded Software
Terminal Servers
Console Servers
Console Management Software
Server Management
Visualization
Print Servers
MPS & LPS
EPS2-100 & EPS4-100
Network Time Servers

Highlights
Specifications
Ordering

Lantronix's MPS/LPS Micro Print Servers combine the convenience of a small, directly attached parallel print server with features such as support for 10/100 Ethernet and support for IPX, TCP/IP, AppleTalk, NetBIOS/NetBEUI and LAT protocols.

Support for TCP/IP, IPX, NetBIOS/NetBEUI, LAT protocols (all products) and Appletalk protocols (MPS100)
Support for 10/100 Ethernet (MPS100) or 10 Mbs Ethernet (LPS1)
1 Centronics/Bitronics-compatible parallel port (direct attach)
Easy installation and configuration
Telnet and Reverse Telnet (rtel) support
Management via Telnet, SNMP, HTTP (MPS100), DHCP and EZWebCon, Lantronix's management software
Flash ROM for easy software upgrades
CD-ROM with EZWebCon software and reference manual
External power supply included

Supported Protocols LPS1-T
Any combination of: TCP/IP (Unix), IPX (Novell NetWare), NetBIOS/ NetBEUI (LAN Manager/WindowsNT) and LAT (DEC)

MPS100
Any combination of: TCP/IP (Unix), IPX (Novell NetWare), AppleTalk (Macintosh/EtherTalk), NetBIOS/NetBEUI (LAN Manager/Windows NT) and LAT (DEC)
Network Interface LPS1-T: 10BASE-T (RJ45 connector)

MPS100: 10/100 RJ45
Parallel Interface 36-pin male Centronics, attaches directly to 36-pin female Centronics parallel printer port Supports HP Bitronics mode to provide bi-directional high speed data flow on the parallel port
Data Rates Parallel: Burst rate 150 Kbps
Management SNMP Compatible: Supports MIB II and parallel MIB, Novell Compatibility: Supports both NDS and bindery emulation, QINST: Quick and easy install utility for Novell NetWare, DHCP, EZWebCon: Lantronix's management software

MPS100: HTTP
Device Support Supports printers with Centronics parallel interface
System Software Flash ROM Standard: downloadable from a TCP/IP host (TFTP download), DECnet host (MOP download) or NetWare host
Diagnostic LEDs LPS1-T: Good Link, OK/Network Activity

MPS100: Link, Speed, Network Activity
Compatibility Ethernet Version 2.0/IEEE 802.3/802.3u
Power Requirements LPS1-T: 6VDC @ 0.7A (External adapter included), 120 or 220VAC

MPS100: 5VDC @ 0.7A (External adapter included), 120VAC or 220VAC
Environmental Operating Temperature
5 to 50°C (41 to 122°F)

Storage Temperature
-40 to 66°C (-40 to 151°F)

Heat Dissipation
5 Watts
Physical Dimensions
(H x W x D)		 1.00 x 2.30 x 3.30 in
(2.5 x 5.8 x 8.4 cm)

Weight: .31 lbs (.14kg)
Shipping Dimensions
(H x W x D)		 4.375 x 9 x 7.375 in
(11 x 22.86 x 18.73 cm)

Weight: 2.7 lbs (1.23 kg)
Agency Approvals LPS1-T:
FCC, UL, CSA, TUV, CE

MPS100: FCC, C/UL, TUV, CE
Warranty 1-year limited warranty - as of August 1st, 2003

Part Number Description
LPS1-T-01 Micro print server, direct connect parallel port, Centronics/Bitronics compatible, RJ45 (10BASE-T) network port, diagnostic LEDs, Installation Guide, CD-ROM with EZWebCon software and reference manual, external 120VAC power supply
LPS1-T-02 Same as above with 220VAC power supply
MPS100-01 10/100 micro print server, direct connect parallel port, Centronics/Bitronics compatible, 10/100 RJ45 network port, diagnostic LEDs, Installation Guide CD-ROM with EZWebCon software and reference manual, HTTP, external 120VAC power supply
MPS100-02 Same as above with 220VAC power supply
Datasheet (PDF)
Installation Guide (PDF)
Reference Manual (HTML)
Reference Manual (PDF)
Latest Firmware for MPS100
Latest Firmware for LPS1
Networking Tutorials
Glossary

 
 

Back to Home Page

                                      

                         

 

©National Data Mux 2002. - All products and brand names mentioned are trademarks or registered trademarks of their respective owners