Products
Embedded Device Servers
Device Servers
Single-Port
UDS100
UDS-10
MSS100
MSS485-T
Multiport
MSS4
MSS-VIA 
Industrial
CoBox-FL
CoBox-FL-IAP
UDS-10-IAP
DSTni-XPress DR & DR-IAP
Embedded Software
Terminal Servers
Console Servers
Console Management Software
Server Management
Visualization
Print Servers
Network Time Servers

 

Highlights
Specifications
Ordering

 

Remote Firmware upgrades, saving money and time from manual upgrades
The IAP version supplies many Industrial Communications Protocols
Connect enterprise (ERP, MES) systems to factory floor devices without disturbing existing control networks
Configurable serial interface supports RS-232, RS-422 or RS-485
10Base-T/100Base-TX Ethernet (RJ-45)
Isolated serial and Ethernet ports
FM approved for hazardous locations Class I, Div.2

Remotely configure, program, monitor and manage: PLCs, Drives, Process Controls, Power Monitoring Equipment, Barcode Scanners, and other factory floor serial devices

The DSTni-XPress DR Device Server allows most any serial device to be connected to a new or existing Ethernet network. By encapsulating serial data and transporting it over Ethernet, the DSTni-XPress DR allows virtual serial links to be established over Ethernet. By using this unit, limited distance, point-to-point, direct serial connections can now be extended within the plant, throughout the facility or across the global enterprise.

When used in conjunction with an OPC server, most Windows® based HMI, SCADA and PC-based control applications have full access to information in the connected device. Existing COM-port based Windows® applications can access network-enabled devices, using our redirector software. Redirector software allows the creation of virtual serial ports, which can be mapped to remote Device Servers over Ethernet with the DSTni-XPress DR-IAP version.

The IAP installable communication drivers allow specific support for most industrial communication protocols. With native support for these protocols, devices that previously allowed only one connection can now support multiple connections simultaneously.

Flexible configuration options allow the unit to be setup locally using the serial port, or remotely over Ethernet using Telnet or a common web browser. Included Windows® based configuration software simplifies the process of installing communication drivers and in configuring them for use with attached devices. Flash memory provides for maintenance-free non-volatile storage, and allows future system upgrades.

Packaged in a rugged DIN-rail mount case and featuring 2000 V isolation, a wide 0 to 60°C operating range, and a 9-30VDC / 9-24VAC power input, the DSTni-XPress DR and DSTni-XPress DR-IAP are ideal for any industrial application.

Serial Interface Interface: RS-232, RS-422 or RS-485
Connector: Screw terminals or RJ45
Data Rates: 300 to 115,200 bps
Characters: 7 or 8 data bits
Parity: odd, even, none
Stop Bits: 1 or 2 Flow Control:RTS/CTS (RS-232 only)
Installable serial protocols
Network Interface Standards:ARP, UDP/IP,TCP/IP, ICMP,SNMP,BOOTP, DHCP,TFTP,Telnet and HTTP
Interface: 10Base-T/100Base-TX Ethernet
Connector: RJ45
Installable application layer protocols
Indicators Ready, Fault/Configuration,Activity, Link, Serial Transmit Data, Serial Receive Data
Management SNMP, serial,Telnet and HTTP (web browser)
Isolation Ethernet: 1500 Vrms
Serial: 2000 Vrms
Power Input: 9 to 30VDC / 9-24VAC, 3W maximum
Connector: Screw terminals for power and ground
Environmental (Operating) Temperature: 0° to 60°C (32° to 140°F)
Humidity: 20% to 90% RH, non-condensing
Packaging Mounting: DIN-rail (35 mm)
Material: High-impact plastic
Dimensions: 90 x 60 x 36 mm (3.54 x 2.4 x 1.4 in)
Agency Approvals UL, CSA,TUV, FCC, CE, FM Class I, Div.2
Software Included Windows® 95/98/ME/NT/2000 based configuration software simplifies initial setup
Shipping Dimensions
(H x W x D)
111 x 228.6 x 187.3 mm (4.375 x 9.0 x 7.375 in)
Warranty 1-year limited warranty - as of August 1st, 2003

Part Number Description
UDS-10-IAP Device server, DB25 (RS-232, RS-422/485) DCE serial port, RJ45 (10Base-T) network port, diagnostic LEDs, APS CD-ROM with configuration tools, installable communication drivers and installation guide.
UDS-M-SBC Male DB25 to RS-422/485 screw block connector
Datasheet (PDF)
User Guide (PDF)
Quick Start Guide (PDF)
Networking Tutorials
Glossary
 

 

 

Back to Home Page

                                      

                         

 

©National Data Mux 2002. - All products and brand names mentioned are trademarks or registered trademarks of their respective owners