Embedded Device Servers
Single Chip
CoBox Mini
CoBox Mini100
CoBox Micro
Embedded Integration Kit
Device Servers
Embedded Software
Terminal Servers
Console Servers
Console Management Software
Server Management
Print Servers
Network Time Servers



The Lantronix CoBox Micro Device Server is a board level product for OEM users who want to embed proven mainstream Ethernet connectivity into their products quickly and economically.

The CoBox Micro brings over a decade of networking experience, rock-solid firmware and extensive applications support in industrial and commercial environments.

Measuring only 1.6 in x 1.9 in, the CoBox Micro can easily fit into almost any size device that would benefit from integrated network connectivity. Serial interfacing is accomplished via a TTL connector and for Ethernet access, an RJ45 (10BASE-T) is available. The CoBox Micro supports the same IP protocol stack found on the other Lantronix CoBox products.

Easily network-enable any product
Flexible, well-developed IP protocol stack
Custom protocol support available
Ethernet RJ45 (10BASE-T) connector on the board
TTL data interface
Accepts 5V regulated input power
Internal Web server, Serial, Telnet and SNMP management
Flash ROM for easy software upgrades

Supported Protocols IP: ARP, UDP, TCP, DHCP, SNMP and TFTP
Compatibility Ethernet: Version 2.0/IEEE 802.3
Network Interface RJ45 (10BASE-T)
Serial Interface 2 TTL Serial Interfaces
Data Rates 300 bps to 115.2 Kbps
Serial Line Formats Characters: 7 or 8 data bits
Stop bits: 1 or 2
Parity: odd, even, none
Modem Control Signals DTR, RTS, CTS, DCD
Flow Control XON/XOFF
Management Internal Web server
SNMP (read only)
Serial login
Telnet login
System Software Flash ROM standard: new software can be downloaded from a TCP/IP host (TFTP) or over serial port
Diagnostic LEDs Transmit Data
Receive Data
Good Link
Power Requirements 5VDC +/-5% at roughly 200mA
Memory Flash: 128K
RAM: 128K
NVRAM: 512 Bytes
Environmental Standard Temperature: 0 to 70°C (32 to 158°F)
Storage Temperature: -40 to 85°C (-40 to 185°F)
Physical Dimensions 40.0mm x 49.0mm (1.574 in x 1.929 in)
Click for Board Layout Dimensions and Pinout Diagrams

Part Number Description
CO-E2-11AA Board-only Device Server
Datasheet (PDF)
French Datasheet (PDF)
Spanish Datasheet (PDF)
Installation Guide (PDF)
Latest Firmware
Board and Pinout Diagrams
Networking Tutorials



Back to Home Page




ŠNational Data Mux 2002. - All products and brand names mentioned are trademarks or registered trademarks of their respective owners